Dispenser Base for DIN 6799

Instruction manual for dispenser base and applicator tool for retaining rings DIN 6799

1.	Remove the sealing tube from the loader.
2.	Insert the tapered end of the loader into the slot of the dispenser, making sure that the tapered part makes contact with the bottom and lock it in with the knurled screw (The open side of the rings must be facing the opposite of the clamping screw).

3.	Insert the applicator (with the stamped number facing up) into the dispenser guides and push it to the stop position.

4.	Remove the applicator. A ring will be left inserted in the special elastic housing and can be easily applied to its functioning position.